EL1-138 - Improved interference mitigation in PNT by using novel multi-element antenna techniques
DESCRIPTION
Controlled Reception Pattern Antenna (CRPA) systems have traditionally been developed for defence applications, where they provide robust protection against Global Navigation Satellite System (GNSS) interference. However, the increasing prevalence of jamming and spoofing threats is creating a growing need for resilient Positioning, Navigation and Timing (PNT) solutions in civil applications, including emergency services, critical infrastructure, autonomous vehicles and unmanned aerial systems.
Current CRPA solutions are often based on complex digital beamforming architectures requiring high-performance FPGA processing, resulting in high cost, size and power consumption. To enable wider adoption in civil markets, more affordable approaches are needed.
Recent developments in compact reconfigurable antennas, low-cost RF networks and intelligent control algorithms have demonstrated the potential to achieve interference mitigation with significantly simpler and lower-cost architectures. The successful deployment of such systems requires advances in areas such as direction-of-arrival estimation, calibration methodologies suitable for mass production, high-accuracy phase shifting and variable gain control networks.
In parallel, emerging antenna technologies offer new opportunities for compact interference-resistant GNSS receivers. Multi-mode and metamaterial-based antennas can exploit multiple feed points and resonant modes within a single antenna structure to generate adaptive radiation patterns and create interference nulls within a compact footprint.
Additional opportunities arise from novel antenna concepts and materials, including acoustic and topologically protected antenna architectures (by carefully patterning materials, compact devices can be created, where traveling electromagnetic waves are protected against scattering and defects, even when navigating sharp corners and controlling the leak of radiation at precisely defined angles). These technologies can enable the creation of multiple interference nulls across a hemispherical field of view, allowing simultaneous suppression of several interference sources.
Furthermore, antenna arrays employing element spacing smaller than half a wavelength (sub-λ/2) may provide compact solutions for spoofing detection and mitigation, although they introduce additional challenges in pattern control and calibration.
The objective of this activity is to investigate, design and demonstrate innovative antenna-based techniques for the detection and mitigation of GNSS jamming and spoofing. The activity will assess the suitability of novel CRPA concepts, including analogue beamforming, hybrid RF architectures, multi-mode antennas, metamaterial-based antennas and sub-λ/2 array configurations, with a focus on low-cost civil PNT applications.
The tasks to be performed shall include:
- Civil Requirements Review
- Review state of the art in low-cost CRPA technologies, RF architectures and compact multi-element antenna solutions.
- Identify current and future civil applications for CRPA systems including emergency services, infrastructure and autonomous vehicles.
- Capture application-specific operational needs and derive a consolidated set of technical requirements and performance targets
- Review state of the art in low-cost CRPA technologies, RF architectures and compact multi-element antenna solutions.
- Concept and System Design:
- Using the technologies identified in the Civil Requirements Review, the two most promising solutions will be developed into broader concepts for interference mitigation, against the requirements identified.
- Modelling will be undertaken of two complementary concepts to assess anticipated performance with respect to jamming mitigation and spoofing detection.
- A detailed design of the system including antenna subsystem, RF architecture and associated signal processing algorithms will be performed.
- Using the technologies identified in the Civil Requirements Review, the two most promising solutions will be developed into broader concepts for interference mitigation, against the requirements identified.
- Prototype Development, Verification Validation
- Manufacture prototypes of the two selected antenna solutions
- Characterise antenna and RF subsystem performance through laboratory testing.
- Integrate, verify and validate the complete RF system under representative interference scenarios in laboratory facilities and, where feasible, in realistic operational environments.
- Document the achieved performance and lessons learned.
- Manufacture prototypes of the two selected antenna solutions
- Exploitation Roadmap
- Define a technology maturation and generate an exploitation roadmap for how the technology can be matured for PNT use cases.
- Define a technology maturation and generate an exploitation roadmap for how the technology can be matured for PNT use cases.
The main outputs of the activity will consist of:
- State-of-the-art, Requirements and Concept and System Design reports
- Two Prototype demonstrators implementing distinct technical approaches
- Verification and validation reports, including recommendations for integration into next generation GNSS receiver architectures.
- A technology exploitation and commercialisation roadmap supporting progression towards NAVISP Element 2 activities.
It is noted that no Participating State expressed their opt-out for this activity (EL1-138).