EL1-148 - A Snapshot‑Based Receiver Concept for LEO PNT

EL1-148 - A Snapshot‑Based Receiver Concept for LEO PNT

DESCRIPTION

Snapshot receiver technology has significant interest in recent years, proposing itself as an alternative to conventional GNSS receiver architectures, particularly for handheld/low-power devices.

With the rise of LEO constellations for PNT services, snapshot receiver architectures must evolve accordingly, exploiting the opportunities and taking into account the differences and challenges of this novel paradigm. In this scenario, the advance of Multi-Layer Satellite Systems concept shall be considered, adding further complexity to the navigation landscape and calling for a comprehensive assessment of the applicability and performance of snapshot receiver technologies in such environments.

The solution can benefit from both LEO and snapshot receiver advantages: 

  • Enhanced Resilience: LEO signals are harder to jam and spoof because of their high power on the ground and fast satellite dynamics.
  • Reduced Power Consumption: the device can remain inactive for extended periods and activated only briefly to capture snapshots of the received signals.
  • Lower Implementation Cost: because of its simplified front-end, snapshot receivers can offer a cost-effective alternative to traditional receiver designs.

Several challenges associated with the application of snapshot receiver technology to LEO-based and multi-layer PNT systems require further investigation, including:

  • Extended Doppler Search Space: LEO satellites exhibits a higher velocity compared to traditional MEO satellites, leading to a larger Doppler shifts/rates. This, in turn, poses several challenges in snapshot receiver processing, such as:
  • Higher computational load
  • Increased acquisition time
  • Risk of missing the correct Doppler bin if the search spacing is not adequately fine
  • Clock Instability: The short integration time and increased Doppler shifts make clock instability and drift far more critical.

The objective of the activity is to study, design, and test the performance of a snapshot receiver solution compatible with:

  • MEO PNT Systems, including at least GPS L1 C/A and Galileo E1
  • LEO PNT Systems
  • Multi-Layer Satellite Systems

The activities shall include the following tasks:

  • Analyse disruptive signal-processing techniques for LEO snapshot signal processing and multi-layer PNT snapshot signal processing.
  • Develop a multi-layer PNT snapshot receiver prototype.
  • Test the solution in a laboratory environment using both simulated and real data.

The main outputs of the activity shall consist of:

  • Technical notes describing the trade-offs and design
  • Prototype of a software-defined GNSS snapshot receiver
  • Laboratory setup for representative user-scenario characterization, including clocks and SDRs
  • Roadmap for commercialization


It is noted that no Participating State expressed their opt-out for this activity (EL1-148).