Filter By
Element 2 - Competitiveness in PNT
-
Start date: 08/03/2024Duration: 24 MonthsSENTINEL is an innovative project that aims to develop a comprehensive solution for monitoring the use of earth moving machines and addressing the crucial challenges of theft prevention and ensuring correct machine usage. The earthmoving machines market, a significant sector in the construction and mining industry, has witnessed a growing trend towards equipment rental and leasing, both in Europe…
Subcontractors
-
Start date: 08/03/2024Duration: 6 MonthsIn recent years, IoT applications have grown by leaps and bounds, however, due to its typically small physical size, only a small battery can fit inside a compact enclosure. This means energy usually comes at a high premium. Traditional GNSS chipsets consume too much energy, many IoT applications must either give up offering geolocation functions or suffer from short battery life. For IoT…
Prime contractor
-
Start date: 23/02/2024Duration: 24 MonthsThe scope of the work is to implement a multichannel disciplined oscillator which will optimally combine a set of independent information (GNSS, ADS-B, PTP/NTP) in order to provide Time and Frequency with the highest level of protection against GNSS attacks. In fact, the proposed system will implement a set of countermeasures able to detect and to resist to spoofing, meaconing and even jamming…
Subcontractors
-
Start date: 25/01/2024Duration: 18 MonthsIndustrial players face significant difficulties in assessing the vulnerability of their GNSS solutions against interference threats. They are unable to make informed decisions to protect themselves against the feared risks. The effects vary considerably from one type of jamming to another, and from one GNSS receiver to another. As far as spoofing attacks are concerned, countermeasure devices are…
Subcontractors
-
Start date: 15/01/2024Duration: 22 MonthsRelative navigation technologies are crucial for advanced space missions. In the NewSpace market, there are two key trends that are revolutionising spaceflight: Distributed Space Systems (DSS) and In-Space Logistics. Determining the relative states between satellite vehicles is fundamental in S/C formation flying and rendezvous. Global Navigation Satellite Systems (GNSS) can provide…
Prime contractor
-
WISDOM (Wise Integration of Satellites PNT tracking Data using OWL for collision avoidance Management) is an ESA NAVISP-supported project that develops and demonstrates technologies for autonomous satellite collision avoidance. The mission will be carried out with a 6U CubeSat that separates into two 3U CubeSats, each equipped with GNSS and the OWL (Orbital Whereabout Locator) system for…
Subcontractors
-
Start date: 15/12/2023Duration: 24 MonthsIn the last years there has been a growing interest in Low Earth Orbit (LEO) constellations to provide telecommunication and navigation PNT services, both from commercial and governmental entities. ESA’s LEO PNT constellation proposes an augmented-PNT service compared to the classical MEO or GEO satellites in current GNSS systems. In this context, GMV proposes the development of an Engineering…
-
Start date: 15/12/2023Duration: 24 MonthsThe scope of the project is the design of an IC integrated circuit (single die) that implements the front-end receiver section of GNSS multi-band signal receiver space-born platforms. The frontend receiver includes all the circuits from the antenna to the ADC output and provides the digitalised output to the GNSS units base-band processors or SW receivers. The target applications are all GNSS…
-
Start date: 01/12/2023Duration: 24 MonthsCurrently, most of the launchers rely on inertial navigation, which introduces fundamental limitations both at performance and economical levels. In this scenario, hybrid solutions making use of GNSS capabilities emerge as an interesting alternative. One of the most mature initiatives within Europe, promoted by ESA and AVIO, consists of the development of a hybrid navigation unit for the future…
Subcontractors
-
Start date: 30/11/2023Duration: 21 MonthsThe objective of this proposal is to conceive, design and validate a breadboard solution capable of detecting and localizing spoofing. This part is achieved by a monitoring node referred to as SILENT node, which is a disruptive solution that does not exist in current commercial solutions, and that has only been presented in academic papers. An additional SW tool will be developed in the frame of…
Subcontractors