Filter By
-
Start date: 14/10/2020GNSS simulations are an important toolset supporting system engineering trade-offs and decisions. They are used to display and monitor key system performance indicators as well as study system behaviour, both through synthetic scenarios and real data replay. Industry and ESA currently use different tools to simulate GNSS systems, however often constrained to undertake only one of two different…
-
Start date: 06/10/2020GNSS simulations are an important toolset supporting system engineering trade-offs and decisions. They are used to display and monitor key system performance indicators as well as study system behaviour, both through synthetic scenarios and real data replay. Industry and ESA currently use different tools to simulate GNSS systems, however often constrained to undertake only one of two different…
Subcontractors
-
Start date: 19/05/2021Date of Completion: 21/05/2021Position uncertainty during autonomous manoeuvres such as orbit-raising/de-orbiting requires that the local knowledge during low thrust (i.e. with electric propulsion) is accurately determined. Current orbit-raising assumes semi-autonomous control assisted by GNSS, with a long time integral to measure increasing altitude and trajectory of the satellite. The use of a hybrid GNSS unit that…
Prime contractor
Subcontractors
-
Start date: 07/04/2021Current GEO and GTO missions already exploit GNSS signals for in-orbit PNT. NASA’s MMS mission has recently demonstrated that tracking of GPS signals is possible up to 150,000 km from Earth surface (half-way the distance to the Moon). The feasibility of extending the use of GNSS for missions to the Moon has also preliminarily been assessed by ESA via GSP. These preliminary studies have…
Subcontractors
-
Start date: 03/05/2021The need for a robust Position, Navigation and Timing (PNT) system to complement or back up GNSS in critical infrastructure/critical applications is widely acknowledged. This translates into actions taken by stakeholders to further raise awareness (e.g. radio navigation plans in the US and Europe) and for some, pave the way towards some deployment (e.g. recent Request for Information initiated by…
Subcontractors
-
Start date: 23/06/2021Funded under NAVISP Element 2, the headline goal of this 11-month project is to demonstrate a proof-of-concept implementation of a hybrid 5G/GNSS-based positioning system. The project will research, develop and draft the preliminary architecture definition, use cases and requirements for the eventual end-to-end system drawing upon the relevant expertise across the consortium. Once concluded the…
Prime contractor
Subcontractors
-
Start date: 23/07/2021The proposed project will build on the existing capabilities offered by the Spire constellation and develop the tools needed for geolocation signal processing, and to apply these toward the specific task of geolocating GNSS interferences coming from the Earth surface. The project will identify geographic areas for likely detection, develop the detection and geolocation algorithms, plan and execute…
-
Start date: 21/10/2021As the world moves towards greater levels of autonomy and automation, it is expected that wide-area safety systems and services will become the norm including both terrestrial and GNSS-based safety services. Other major developed economies in the United States/Canada (WAAS), Europe (EGNOS), Japan (MSAS), India (GAGAN), South Korea (KASS), and Australasia (SouthPAN) have now or will soon have…
Subcontractors
-
Start date: 01/06/2021Infobex Ltd. submitted a proposal titled “PROVIDING GALILEO SIGNALS FOR GROUND NAVIGATION IN HUNGARY” for the NAVISP Element 2 Call for Proposals of the European Space Agency (ESA) which has been positively evaluated and thus Infobex Ltd. had been entrusted by the implementation of the project. According to this, Infobex Ltd. establish a new, nation-wide, VRS-type GNSS RTK correction service…
Subcontractors
-
Start date: 01/06/2021The activity consists in the development of TLR4 laboratory prototype of a future spaceborne GNSS RFI detection payload on-board the GINKO-S nanosatellite. The GNSS RFI Payload Breadboard (the product) is the main enabling item of a future GINKO-S Demonstration Mission for GNSS interference monitoring and localization from space and warning service for civil use. Detection and localization of…
Subcontractors
Name: Politecnico di Torino - Department of Electronics and Telecommunications
Country: Italy
Website: https://www.polito.it/