The activity is a development and qualification of a Compact Versatile SBAS down converter, for use in GEO and MEO Satellites distributing augmentation data for more accurate positioning. Satellite Based Augmentation Systems have regional systems like EGNOS in Europe, WAAS in the US, MSAS in Japan and so on. Such functions have been embarked on multiple satellites of the last decades, and will…

Prime contractor

This project aims at implementing the Beidou signals B1 and B3 on Syrlinks GNSS receiver product. The Syrlinks receivers are based on a common SDR hardware platform designed for small satellites. The receiver already works with GPS and Galileo signals and will extended to make a autonomous PVT (Position, Velocity and Time) based only on Beidou signals. Whatever signals come from, GPS, Galileo,…

Prime contractor

Development of Marconi GNSS Receiver for multi purposes application The proposed activity  aim to the development of medium-low cost compact standalone GNSS receiver, with high reliability and performance, to be used both in institutional as well as commercial spaceborne applications, in full accordance with the emerging market needs like Leo Constellation, Moon, Launcher, MEO and GEO…

Prime contractor

Timing and Synchronisation is a fundamental building block in 5G and GNSS systems that plays a pivotal role in the network operation. However, GNSS signals exhibit some vulnerabilities and there is an increasing need to augment them with supplementary technology to secure the required reliability and longevity.  LEO-SYN+ project will develop a Positioning Navigation and Timing (PNT) solution…

Prime contractor

The main objective of JNRS project is the development of a high-performance SDR device specifically tailored for GNSS applications (e.g., simulation of GNSS signals, SDR-based GNSS receiver, monitoring, spectrum surveillance, etc.), and targeting specific technical and cost requirements that should foster its market viability. This device is essentially made up of 2 main boards:  - JNRS-SRD,…

Prime contractor

The RHEA DOVER-Pathfinder (DOVER) mission aims to demonstrate a novel resilient GNSS capability from Low Earth Orbit (LEO). The DOVER-Pathfinder (DOVER) mission consists of an innovative PNT waveform designed by RHEA-UK; the RHEA DOVER satellite utilising the expertise, integration and test, and rapid time to space of the Open-Cosmos bus, MAIT, and flight control systems; a DOVER ground receiver…

Prime contractor

NAV-SSHE aims at designing, prototyping and demonstrating new solutions for PNT using 5G and GNSS in combination for critical applications, in hostile environments. Safety-critical for their nature involve human lives; consequently, they must have a high level of reliability and availability as well as be resilient to external factors. The project targets, in particular, this second aspect,…

Prime contractor

Subcontractors

The G3ISTAR is a small GPS/Galileo dual-frequency GNSS receiver designed for use by micro-launchers, based on existing GNSS Receiver solution from DEIMOS and a flight-proven platform for CubeSats. The reliability and integrity of the receiver’s navigation solution will be ensured through the development of the Galileo Open Service Navigation Message Authentication (OSNMA) and Failure Detection…

Prime contractor

The intended development targets a digitally controlled Antenna Power Regulator (APR) module based on GaN technology, in line with the market demands for high efficient centralized power conversion and distribution. This development enables a relevant mass and volume reduction with respect to current state-of-the-art solutions, so that leading to a more competitive solution due to the increase in…

Prime contractor

This project will continue the Space GNSS Receiver maturation, but in this case, it will be done by DEIMOS in collaboration with University of Padua that will provide their P2OD SW. Also, with the advent of the availability of a new open service from Galileo, the High Accuracy Service (HAS), our proposal is to make use of E6-B signal to provide the precise corrections for PPP on-board. As…

Prime contractor

Subcontractors