Coherent Clock project will build a resilient and secured GNSS time solution based on several GNSS receivers distributed at metro-wide distances and able to combine their timing information into one global solution to optimize the accuracy of the time source and to provide synchronization to the core and aggregation network. This ground-based time distribution system is based on the use of the…

Prime contractor

The Voliera (overall) project has been conceived to develop a stand-alone localization platform independent from the current on-board subsystem with the aim to minimize the wayside components linked to the localization.  Voliera project foresees different  phases by following an engineering development. In the phase 2 there are 2 main goals: -develop the tools needed to verify the properties…

Prime contractor

Subcontractors

CHARLI project aims to offer a new localization service to make rescue workers safer during an intervention. Today, no commercialized solution meets the requirements of precise and reliable tracking of emrgency agents: agents still die due to a lack of positioning solution. CHARLI solution is based on a foot-mounted localization device and innovative alogorithms that allow the poition

Prime contractor

Subcontractors

The objective of the activity is to develop a manufactor a prototype of an intgerated multi band and multi constellation GNSS antenna for high precision on ground applications.

Prime contractor

The activity is a development of a space segment compact C-Band LNA for use in Geostationary and Non-Geostationary Orbits. Its primary target is SBAS applications, but the Product will be capable to cover the full C-Band. The key function of the unit is to receive a signal at Uplink C-Band to feed the signal into the C-to L-Band downconverter for L-Band signal processing. Typical input signals…

Prime contractor

To address higher requirements in the GNSS market, in particular the reception of signals with higher bandwidth and poor amplitude levels, Saphyrion has developed, through an ESA contract the next generation of GNSS RF-Front-end ASICs, called  SY1009 and the SY2001. The SY1009 is a radiation hardened L-band RF down-converter for GNSS receivers. The SY2001  is a radiation hardened fractional-N…

Prime contractor

Due to the rapidly increasing number of leisure drones operated everywhere, different accidental and deliberate incidents happen and even are becoming severe when happened in a critical area, like, for example, airports, ports, events in city areas, etc… As it is possible to see from the table below, some examples of incidents in different domains have demonstrated the need for an effective…

Prime contractor

Subcontractors

In the world of avionic systems, we observed a transition from federated avionics architectures to Integrated Modular Avionics (IMA) where IMA architectures provide a shared computing platform, communications, and I/O resource pool that is partitioned by multiple tasks of differing design assurance criticalities. A similar transition is currently observed in the world of satellite systems. The…

Prime contractor

This project aims at implementing the Beidou signals B1 and B3 on Syrlinks GNSS receiver product. The Syrlinks receivers are based on a common SDR hardware platform designed for small satellites. The receiver already works with GPS and Galileo signals and will extended to make a autonomous PVT (Position, Velocity and Time) based only on Beidou signals. Whatever signals come from, GPS, Galileo,…

Prime contractor

Development of Marconi GNSS Receiver for multi purposes application The proposed activity  aim to the development of medium-low cost compact standalone GNSS receiver, with high reliability and performance, to be used both in institutional as well as commercial spaceborne applications, in full accordance with the emerging market needs like Leo Constellation, Moon, Launcher, MEO and GEO…

Prime contractor