Filter By
Element 2 - Competitiveness in PNT
-
Start date: 06/05/2022Duration: 27 MonthsTiming and Synchronisation is a fundamental building block in 5G and GNSS systems that plays a pivotal role in the network operation. However, GNSS signals exhibit some vulnerabilities and there is an increasing need to augment them with supplementary technology to secure the required reliability and longevity. LEO-SYN+ project will develop a Positioning Navigation and Timing (PNT) solution…
Prime contractor
Name: Celestia Technologies Group (UK) Ltd
Country: United Kingdom
Website: https://www.celestia-uk.com/
-
Start date: 01/04/2022Duration: 18 MonthsThe main objective of JNRS project is the development of a high-performance SDR device specifically tailored for GNSS applications (e.g., simulation of GNSS signals, SDR-based GNSS receiver, monitoring, spectrum surveillance, etc.), and targeting specific technical and cost requirements that should foster its market viability. This device is essentially made up of 2 main boards: - JNRS-SRD,…
-
Start date: 01/04/2022Duration: 13 MonthsThe RHEA DOVER-Pathfinder (DOVER) mission aims to demonstrate a novel resilient GNSS capability from Low Earth Orbit (LEO). The DOVER-Pathfinder (DOVER) mission consists of an innovative PNT waveform designed by RHEA-UK; the RHEA DOVER satellite utilising the expertise, integration and test, and rapid time to space of the Open-Cosmos bus, MAIT, and flight control systems; a DOVER ground receiver…
-
Start date: 01/09/2021Duration: 16 MonthsNAV-SSHE aims at designing, prototyping and demonstrating new solutions for PNT using 5G and GNSS in combination for critical applications, in hostile environments. Safety-critical for their nature involve human lives; consequently, they must have a high level of reliability and availability as well as be resilient to external factors. The project targets, in particular, this second aspect,…
Subcontractors
-
Start date: 01/07/2021Duration: 24 MonthsThe G3ISTAR is a small GPS/Galileo dual-frequency GNSS receiver designed for use by micro-launchers, based on existing GNSS Receiver solution from DEIMOS and a flight-proven platform for CubeSats. The reliability and integrity of the receiver’s navigation solution will be ensured through the development of the Galileo Open Service Navigation Message Authentication (OSNMA) and Failure Detection…
Prime contractor
-
This project will continue the Space GNSS Receiver maturation, but in this case, it will be done by DEIMOS in collaboration with University of Padua that will provide their P2OD SW. Also, with the advent of the availability of a new open service from Galileo, the High Accuracy Service (HAS), our proposal is to make use of E6-B signal to provide the precise corrections for PPP on-board. As…
Subcontractors
-
Start date: 02/11/2020Duration: 18 MonthsThe goal is to comibe the 2 complementry distress function inside one compact and waterproof hardware so that it can be intergrated into a compact life-vst for marine safety of sailors. Syilinks will then be the first beacon supplier in the world to propose this fuction providing: PLB 1G + RLS: the ultimate alert, in all locations (satellite distress) AIS-MOB: the proximity alter at sea, quick…
-
Covert Antenna Systems (CAS) in conjunction with The University of Nottingham, are developing a clip-on antenna system with coupler for mobile phones. This system will provide enhanced GNSS reception, enabling improved position estimation from mobile phones. In addition we will also take advantage of the opening of the Android GNSS interface to access the raw GNSS data to enable developers to…
Subcontractors
-
Start date: 01/11/2020Duration: 24 MonthsThe ‘Developing Real World A-PNT Solutions Project’ will establish a multi-user, accessible service to deliver progressive, high-value experimentation and proof of concept activities to enable BVLOS drone operations in non-segregated airspace. A key tenet of this enterprise will be the establishment of novel A-PNT services which will accelerate capabilities necessary enable future drone…
Subcontractors
Name: Occado Technology
Country: United Kingdom
Website: https://www.ocadogroup.com/technology/technology-pioneers
-
A SoC is a single chip, typically in CMOS technology, which integrates in a single die the major building blocks of a complex system such as RF, analog digital processing data path, SRAM and a CPU so to make the application very compact, low cost and low power consumption. The role of the identified SoC product object of this NAVISP project, is to allow un-degraded Acquisition and Tracking…
Subcontractors