-
Start date: 06/03/2024Duration: 36 MonthsThe I-MASTER project aims to design and develop on a fresh water volcanic lake a National Test Range to test and validate by using self-propelled unmanned large sized surface ship models devices, subsystems, apparatuses, and procedures (data fusion, AI, rules and regulations) for MASS operations.
Prime contractor
Name: CNR-INM (Italian National Research Council - Institute for Marine Engineering)
Country: Italy
Website: http://www.inm.cnr.it/
Subcontractors
-
Start date: 23/02/2024Duration: 24 MonthsThe scope of the work is to implement a multichannel disciplined oscillator which will optimally combine a set of independent information (GNSS, ADS-B, PTP/NTP) in order to provide Time and Frequency with the highest level of protection against GNSS attacks. In fact, the proposed system will implement a set of countermeasures able to detect and to resist to spoofing, meaconing and even jamming…
Subcontractors
-
Start date: 06/02/2024Duration: 24 MonthsThe NUMEROSO activity aims to assess the benefits of integrating Signals of Opportunity (SOOPs) with GNSS signals for navigation purposes, considering both terrestrial (such as 5G mobile or WiFi) and space-based (such as those transmitted by LEO satellites, or non-terrestrial networks) SOOPs. Leveraging advanced machine learning (ML) techniques, NUMEROSO will make use of SOOPs to enhance…
Subcontractors
-
Start date: 30/11/2023Duration: 18 MonthsThe principal aim of this project is to explore the applicability of today optics and photonic technologies to GNSS receivers. It is not always straightforward to understand which part of an electronic system may be conveniently replaced by its “photonic” counterpart, with clear advantages in terms of performance, integration density, power consumption, weight, EM immunity and…
Subcontractors
Name: TeCIP Institute of Sant’Anna School of Advanced Studies
Country: Italy
Website: https://www.santannapisa.it/en
Name: Thales Alenia Space Italy
Country: Italy
Website: https://www.thalesgroup.com/en/global/activities/space
-
Start date: 25/05/2023Duration: 30 MonthsThe Voliera (overall) project has been conceived to develop a stand-alone localization platform independent from the current on-board subsystem with the aim to minimize the wayside components linked to the localization. Voliera project foresees different phases by following an engineering development. In the phase 2 there are 2 main goals: -develop the tools needed to verify the properties…
Subcontractors
-
Development of Marconi GNSS Receiver for multi purposes application The proposed activity aim to the development of medium-low cost compact standalone GNSS receiver, with high reliability and performance, to be used both in institutional as well as commercial spaceborne applications, in full accordance with the emerging market needs like Leo Constellation, Moon, Launcher, MEO and GEO…
Prime contractor
Name: Thales Alenia Space Italia S.p.A.
Country: Italy
Website: https://www.thalesaleniaspace.com/en
-
The main objective of JNRS project is the development of a high-performance SDR device specifically tailored for GNSS applications (e.g., simulation of GNSS signals, SDR-based GNSS receiver, monitoring, spectrum surveillance, etc.), and targeting specific technical and cost requirements that should foster its market viability. This device is essentially made up of 2 main boards: - JNRS-SRD,…
-
Start date: 16/04/2021Duration: 18 MonthsThe Hybrid Overlay Positioning with 5G and GNSS (HOP-5G) project targets the demonstration of a 5G local overlay testbed for enhanced user positioning, in combination with GNSS and sensor technologies. Within this project, the HOP-5G consortium focuses on the exploitation of 5G innovative positioning enablers and their hybridisation with GNSS and sensors. This is based on the dedicated deployment…
Prime contractor
Subcontractors
Name: Ericsson AB (Ericsson Research)
Country: Sweden
Website: https://www.ericsson.com/en/about-us/company-facts/ericsson-worldwide/sweden
-
Connected and autonomous cars represent the largest user community of high-integrity, high-accuracy and multi-sensor positioning systems. The project aims to develop a European level accredited laboratory for certified performance assessment of Advanced Driver Assistance Systems (ADAS) and autonomous driving applications relying on multi-sensors high integrity/high accuracy PNT solutions…
Subcontractors
-
This project will continue the Space GNSS Receiver maturation, but in this case, it will be done by DEIMOS in collaboration with University of Padua that will provide their P2OD SW. Also, with the advent of the availability of a new open service from Galileo, the High Accuracy Service (HAS), our proposal is to make use of E6-B signal to provide the precise corrections for PPP on-board. As…
Subcontractors