-
The objective of P-CAR is to realize a PNT laboratory for testing and validation of Connected Autonomous Driving functions in synergy with the EMERGE project under development in the Abruzzo Region. The accredited laboratories are essential facilities to support the certification process and, similarly to the rail domain, P-CAR aims to fill this gap for the automotive applications by developing…Subcontractors
Name: Innovation Pole on Automotive
Country: Italy
Website: http://www.innovazioneautomotive.eu/en/polo-innovazione-automotive/iam/
-
Start date: 11/01/2021Duration: 18 MonthsRecent advances in technology have contributed to the deployment of a "de-facto" large GNSS receiver array based on affordable smart devices that are easy to find in the consumer market (dual band smartphones, raw GNSS data recording, new sensors). These devices, evolving fast with each new generation, feature an increasing number of capabilities and sensors able to collect a variety of…Prime contractor
Name: RINA Consulting-Centro Sviluppo Materiali S.p.A.
Country: Italy
Website: https://www.rina.org/
Subcontractors
-
Start date: 16/12/2020Duration: 15 MonthsIt is long debated whether a relation exists between the tidal stress produced by the Moon and the Sun on the Earth crust and the occurrence of difference geologic events, in particular large earthquakes and volcanic eruptions. Clear evidence for this relation has been elusive for a long time. However, the analysis of more complete global earthquake catalogues has shown that a significant…Subcontractors
Name: RIGCT – Research Institute of Geodesy, Topography and Cartography
Country: Czech Republic
Website: http://www.pecny.cz
-
This project will continue the Space GNSS Receiver maturation, but in this case, it will be done by DEIMOS in collaboration with University of Padua that will provide their P2OD SW. Also, with the advent of the availability of a new open service from Galileo, the High Accuracy Service (HAS), our proposal is to make use of E6-B signal to provide the precise corrections for PPP on-board. As…Subcontractors
-
To set up a Worksite Protection System prototype introducing individual protection to improve workers safety and cutting delay in train traffic movements due to the limitation of the process based on current ATWS: • Avoid the impact of human factor in safe decision; • Introduce complete automation real time localization of operators and machines; • Reduce the…Subcontractors
-
GNSS simulations are an important toolset supporting system engineering trade-offs and decisions. They are used to display and monitor key system performance indicators as well as study system behaviour, both through synthetic scenarios and real data replay. Industry and ESA currently use different tools to simulate GNSS systems, however often constrained to undertake only one of two different…Subcontractors
Name: Politecnico di Torino - Department of Electronics and Telecommunications
Country: Italy
Website: https://www.polito.it/?lang=en
-
Start date: 28/10/2020Duration: 15 MonthsThe DGAP Project aims to design, develop and demonstrate in real operational environment, an innovative set of services for the management and monitoring of construction sites in order to support the Site Construction Manager and his/her team in their daily and periodical activities fostering the transition from traditional construction management to digital process and taking advantage of GNSS…Subcontractors
-
Start date: 19/10/2020Duration: 20 MonthsGIASONE is a GNSS integrity monitoring infrastructure able to provide a set of services to the users in order to safeguard its operational status when using GNSS. This solution can be considered the enabling technology to open the way towards a more pervasive usage of GNSS in almost all sectors, even where, its use is still considered secondary or partially applicable for safety reasons, such as,…Prime contractor
-
GSTA is a follow on of a previous project funded by ESA: the GALIST project (Galileo Smart Traceability, ESA Contract 4000118560/16/NL/LF/hh) which had the objective, exploiting GNSS technology, to certify the position of food production events in order to support the “made in” value added. In order to achieve the stated goal, GNSS positioning solution has to be resilient against spoofing…Subcontractors
-
Start date: 16/12/2019Duration: 16 MonthsVOLIERA aims to develop an innovative multi-sensor component aimed at providing relative and absolute position and odometry information suitable for the railway environment. This innovative component will be based on sensors such as for example camera, IMU, LIDAR, GNSS. The main objective is to identify a possible solution (POC) for guaranteeing position and odometry information with high…Subcontractors
