Filter By

RelyMap Connect is analytical software that improves GNSS location calculation performance in complex urban environments. During this activity, Envisage Space Ltd, supported by Cranfield University, will further develop, validate, integrate and demonstrate our technology in multiple city areas of interest. Further, Envisage will be engaging with specific market sectors with the aim of validating…

Prime contractor

Subcontractors

The Voliera (overall) project has been conceived to develop a stand-alone localization platform independent from the current on-board subsystem with the aim to minimize the wayside components linked to the localization.  Voliera project foresees different  phases by following an engineering development. In the phase 2 there are 2 main goals: -develop the tools needed to verify the properties…

Prime contractor

Subcontractors

CHARLI project aims to offer a new localization service to make rescue workers safer during an intervention. Today, no commercialized solution meets the requirements of precise and reliable tracking of emrgency agents: agents still die due to a lack of positioning solution. CHARLI solution is based on a foot-mounted localization device and innovative alogorithms that allow the poition

Prime contractor

Subcontractors

The objective of the activity is to develop a manufactor a prototype of an intgerated multi band and multi constellation GNSS antenna for high precision on ground applications.

Prime contractor

The main objective of (VALLE) is to develop an innovative Privacy Preserving PNT concept that explore the possibilities and capabilities of the Privacy Enhancing Technologies, validating their functionalities but also non-functional aspects such as resilience and robustness by a dedicated red team analysis. The main goal of this project can be summarized as follows: • To identify, define and…

Prime contractor

Subcontractors

The activity is a development of a space segment compact C-Band LNA for use in Geostationary and Non-Geostationary Orbits. Its primary target is SBAS applications, but the Product will be capable to cover the full C-Band. The key function of the unit is to receive a signal at Uplink C-Band to feed the signal into the C-to L-Band downconverter for L-Band signal processing. Typical input signals…

Prime contractor

The main aim of RIPTIDE_PHASE_2 follows the strategic view identified in the first RIPTIDE project and targets the continuation of the development of a resilient PNT solution dedicated to the particularities of the Black Sea and Danube Lower Basin region, to cover a national need of resilient PNT tailored to address a sensitive region of Romania and of the EU. It therefore aims at achieving the…

Prime contractor

Subcontractors

To address higher requirements in the GNSS market, in particular the reception of signals with higher bandwidth and poor amplitude levels, Saphyrion has developed, through an ESA contract the next generation of GNSS RF-Front-end ASICs, called  SY1009 and the SY2001. The SY1009 is a radiation hardened L-band RF down-converter for GNSS receivers. The SY2001  is a radiation hardened fractional-N…

Prime contractor

  The world economic trade has continuously increased over the past decades. For the maritime business, this had led to larger and larger ships and denser traffic. Examples of famous waterways are the Suez Channel, the Kiel Channel, and the Malakka Strait near Singapore. The latter one is passed by 200 to 250 container ships daily that transport 25 % of the global maritime transportation…

Prime contractor

Subcontractors

GNSS such as GPS are vulnerable, largely due to the tiny signal strength and the geometry of satellites in urban environments. Drone regulatory frameworks are progressing to where autonomous flight and operations Beyond Visual Line-Of-Sight (BVLOS) are a possibility, thus driving the need for reliable navigation services to complement or act as a back-up to existing ones (chiefly GNSS). Trusted…

Prime contractor

Subcontractors